Linux/Unix
Hardware drivers, TCP/IP, and DHCP must be enabled in the kernel. A supported Ethernet or
wireless LAN connection must be available.
About this manual
This manual covers the Touchstone TG6452 Telephony Gateway. The model number is on
the label affixed to the Telephony Gateway.
Select an installation location
There are a number of factors to consider when choosing a location to install your Telephony
Gateway:
■
Is an AC outlet available nearby? For best results, the outlet should not be switched and
should be close enough to the Telephony Gateway that extension cords are not required.
■
Is a cable jack available? For best performance, keep the number of splitters between
the jack and cable drop to a minimum. Each splitter attenuates (reduces) the signal
available to the Telephony Gateway A large number of splitters can slow down the
Internet connection and even affect your telephone service.
■
Can you easily run cables between the Telephony Gateway’s location and the phones?
■
If you are connecting devices to the Ethernet ports, can you easily run cables between
the Telephony Gateway’s location and those devices?
■
If you want to install the Telephony Gateway on a desktop, is there enough space on
either side to keep the vents clear? Blocking the vents may cause overheating.
Chapter 2: Get started
Touchstone TG6452 Telephony Gateway User Guide DRAFT Revision 2.3
14