Light patterns for the Internet LED during normal operation
Event
LED Status
Downstream scanning in progress
Red (slow blink)
Upstream ranging in progress
Red (fast blink)
Ranging completed; registration in progress
White (slow blink)
Cable modem was successfully registered
White (steady)
Cable modem failed to register
Red (steady)
WPS LED
Light patterns for the WPS LED during normal operation
Event
LED Status
WiFi switched off
Off
Synchronizing WPS
White (fast blink)
WiFi LED
Light patterns for the WiFi LED during normal operation
Event
LED Status
WiFi switched off
Off
WiFi switched on
White (blinking)
WiFi data is being transmitted
White (blinking)
WiFi disabled due to scheduling
Off
Use the Reset button
Use the Reset button on the back of the Telephony Gateway to reset and initialize the
modem as if you had power cycled the unit. You may need to reset the Telephony Gateway if
you are having problems connecting to the Internet. You will not use this button often.
Use a pointed non-metallic object to press this button. The Reset button is recessed to
prevent accidental resets.
Chapter 5: Operate the Telephony Gateway
Touchstone TG6452 Telephony Gateway User Guide DRAFT Revision 2.3
32