5
Wall adapter
The Wall adapters provide a safe method to
fasten a Roomscapes setup to a wall.
Wall adapters must be fastened securely to
the wall (or other stable object).
Fasteners are not included; you must select
hardware appropriate to the building’s
construction. The bottom of the adapter
must touch the floor
.
Roomscapes wings
Roomscapes wings can be used instead of
Wall adapters or shelves to start or end a run
of panels. To provide stability to a straight
run of panels (81 cm or higher) connect a
pair of Roomscapes wings to every other
panel.
To assemble:
1. Slide the post onto the wings, forming a unit.
2. Slide the unit down onto the panel from the top.
CAUTION
c
Roomscapes wings must always be used in pairs to ensure stability
of panels.
Roomscapes Panels
Display board panels
have several uses. Hook and loop or flannel
materials stick to the soft surface. Displays and messages can be
posted on either side of these panels.
Library panels
can be connected to Roomscapes or mounted to the
wall.
Wave panels
provide a smooth transition from one height to another.
Clear panels
provide a secure physical barrier without blocking light.
Translucent panels
let natural light flow through the classroom and
allow for unobtrusive supervision.
Rice grass panels
have an embedded layer of real rice grass to bring
nature into the classroom.
Window panel
To remove the curtains for cleaning, unscrew the two screws in one of
the curtain rod holders and slide the curtains off the curtain rod.
Bamboo panels
Bamboo panels are made of a bamboo matting laminated onto a
durable plastic core.
Curved panels
These panels are curved allowing spaces to be constructed without
right angles. They can be used together with the cottage roof and
branches to create cosy spaces.
Adjustable panel
This panel can adjust in width from 61 cm to 94 cm, spanning
odd-sized gaps in a Roomscapes setup. Connect the rest of your setup
together, then adjust the Adjustable panel to the right width, and slide
it onto the posts.
CAUTION
c
The Adjustable panel should not be used immediately adjacent to a
safety gate, Roomscapes entry or Teacher arch.
c
Library panels must be fastened securely to the wall unless each end
is connected to another Roomscapes item or a set of Roomscapes
wings. Fasteners are not included; you must select hardware
appropriate to the building’s construction. A competent carpenter or
maintenance person should do the installation.
Canopy
The Canopy includes two ends, three wooden cross-braces, and a
fabric cover.
The Canopy can fasten to any Roomscapes shelf which is 94 or 124 cm
long, and 61 or 81 cm high.
To assemble:
1. Slide the two ends into the posts. Make
sure that the childproof locking ring on
both posts is engaged.
2. Place the three cross-braces over the
gables so that the grooves in the cross-
braces slide into the notches in the gables.
3. Drape the fabric over the structure and
fasten it to the hook and loop fasteners on
the two outside cross-braces.
Summary of Contents for Roomscapes shelves and panels
Page 8: ......
