inS_cnge8MS_reV–
09/17/12 Page 43
INSTALLATION AND OPERATION MANUAL
CNGE8MS
Tech SupporT: 1.888.678.9427
MSTP Port interface
Label
Description
Port No.
Selecting the port that you want to configure.
Priority (0-240)
Decide which port should be blocked by priority in LAN. Enter a
number 0 through 240. The value of priority must be the multiple of
16
Path Cost
(1-200000000)
The cost of the path to the other bridge from this transmitting bridge
at the specified port. Enter a number 1 through 200000000.
Admin P2P
Some of the rapid state transactions that are possible within RSTP are
dependent upon whether the port concerned can only be connected
to exactly one other bridge (i.e. It is served by a point-to-point LAN
segment), or it can be connected to two or more bridges (i.e. It is
served by a shared medium LAN segment). This function allows the
P2P status of the link to be manipulated administratively. True means
P2P enabling. False means P2P disabling.
Admin Edge
The port directly connected to end stations, and it cannot create
bridging loop in the network. To configure the port as an edge port,
set the port to
True
.
Admin Non STP The port includes the STP mathematical calculation. True is not
including STP mathematical calculation. False is including the STP
mathematical calculation.
Apply
Select
Apply
to set the configurations.
