INS_CNXE2GE2TX8MSPOE 11 Jan 2021 PAGE 113
INSTALLATION AND OPERATION MANUAL
CNXE2GE2TX8MSPOE
TECH SUPPORT: 1.888.678.9427
6.6.7 QoS Egress Port Scheduler and Shapers
Configure Scheduler and Shapers for a specific port.
Strict Priority
Label
Description
Scheduler Mode
Controls whether the scheduler mode is Strict Priority or
Weighted on this switch port
Queue Shaper
Enable
Check to enable queue shaper for individual switch ports
Queue Shaper Rate Configures the rate of each queue shaper. The default value is 500. This value is
restricted to 100 to 1000000 whn the Unit is kbps”, and it is restricted to 1 to 3300
when the Unit is Mbps.
Queues Shaper Unit Configures the rate for each queue shaper. The default value is 500. This value is
restricted to 100 to 1000000 when the Unit is kbps, and it is restricted to 1 to 3300
when the Unit is Mbps.
Queue Shaper
Excess
Allows the queue to use excess bandwidth
Port Shaper Enable Check to enable port shaper for individual switch ports
Port Shaper Rate
Configures the rate of each port shaper. The default value is 500
This value is restricted to 100 to 1000000 when the Unit is kbps, and it is restricted
to 1 to 3300 when the Unit is Mbps.
Port Shaper Unit
Configures the unit of measurement for each port shaper rate as kbps or Mbps.
The default value is kbps.