background image

INS_NWKBB100_REV–     06/10/13     PAGE 2

INSTALLATION AND OPERATION MANUAL 

NWKBB100

TECH SUPPORT: 1.888.678.9427

About This Guide

This guide is intended for different users such as engineers, integrators, developers, IT managers, 
and technicians. 

It assumes that users have some PC competence and are familiar with Microsoft Windows 
operating systems and web browsers such as Windows Internet Explorer and Mozilla Firefox, as 
well as have knowledge of the following:

 

»

Installation of electronic equipment

 

»

Electrical regulations and guidelines

 

»

Knowledge of Local Area Network technology

Related Documentation

The following documentation is also available:

 

»

NWKBB100 Datasheet

Website

For information on ComNet’s entire product line, please visit the ComNet website at  

http://www.comnet.net

Support

For any questions or technical assistance, please contact your sales person (

sales@comnet.net

) or 

the customer service support center (

techsupport@comnet.net

)

Safety

 

»

 Only ComNet service personnel can service the equipment. Please contact ComNet Technical 
Support.

 

»

 The equipment should be installed in locations with controlled access, or other means of 
security, and controlled by persons of authority.

Summary of Contents for NWKBB100













Reviews: