21
TROUBLESHOOTING
HANDLING
Plug the power plug
properly
Press on the power kit
Fill up the water tank
Touch the power kit and
the background light
turns on.
Hold down the water level
float cap.
Open the water tank
Place at a shade for
12 hours
Clean or replace the water
tank
Pour out some water in
the water bath
Screw down the water
tank cover
Clean the transducer
Replace with clean water
CAUSE
The power plug is not
properly plugged
The power switch is not
turned on
There is no water in the
water tank
The automatic constant
humidity power is not
turned on The water level
float cap is not held down
New unit
The water in the tank is
not clean
The water level in the
water bath is
too high
There is scale formation on
the transducer
The water is dirty or has
been stored too long
ABNORMAL
SYMPTOM
Indicator not
illuminated, no air,
no fog
Indicator
illuminated, with
air, no fog
Spray with
odor
Indicator
illuminated, no air,
no fog
Small fog
output
Summary of Contents for HTJ-2090
