COMPA TECH S.r.l.
Web: www.compasaw.com - E-mail: info@compasaw.com
Tel. (+39) 059 527887 - Fax (+39) 059527889
- 27 -
ENGLISH
Operator’s handbook
3. TECHNICAL
INFORMATIONS
3.1 Technical features
Supply voltage:
230 V
Rated frequency:
50 Hz
Rated power:
1400 W
Type of operation:
S3-50%
Number of revolutions at idle speed: 2.890 rpm
Blade diameter:
Ø300 mm
Blade hole diameter:
Ø30 mm
Max piece section 90°:
140x70
Max piece section 45° horiz.:
95x70
Max piece section 45° vert.:
140x45
Max cutting height on work bench:
50 (JET)
Weight: 19
kg
(JE); 20 kg (JET)
Dimensions: 560x470x510
mm
3.2 Description of main parts (Fig. 1)
1. Support
surface
2. Rotating
table
3. Saw-motor carrying arm
4. Support
lines
5. Blade
6. Blade internal safety guard
7. Handgrip
8. Motor
9. Motor
plate
10. Upper blade protection
11. Upper surface
12. Upper support line
Only mod. JE
13. Saw-motor carrying arm cover
3.3 Optional features
Portable foldable table with shelf
Roller support
Manual or pneumatic 90°/45° universal clamp
Economic manual clamp
Vertical clamp
Laser
3.4 Noise level (Tab.1)
Reference standards
The noise level test on the machine was carried out
according to the following standards: UNI 7712-AFNOR
S31069 (Tab. 1).
Machine working conditions during tests
Material used for cutting: wood (oak)
blade mod. .........................blade TAUBEWZ72
blade diam. ......................................300 mm
blade rpm ........................................2890 rp
angle of cut ............................................ 90°
cut material section ....................... 42x27 mm
resting table ................. 1000x800x800(h) mm
3.5 Specifi c safety warnings
ATTENTION! This machine can only be
used for processing wood, aluminium and
PVC, with the specifi c blades.
ATTENTION! The materials that cannot be
processed are ferrous materials such as
iron and copper and in any case all the
materials other than those expressly au-
thorised.
In the event of a transportable machine used
permanently or mainly in a factory, in the same
site or in any case for long periods of time, secu-
re the same to the supporting bench.
The minimum safety area surrounding the ma-
chine is 80 cm in the event of larger workpieces.
ATTENTION! The machine can only be
used by one operator at a time. The type
and location of the controls allows the ma-
chine to be used safely by a single operator.
