background image

7

LP GAS LANTERN OWNERS MANUAL

IMPORTANT INFORMATION FOR USE

During operation all surfaces will be extremely hot and 

should not be touched or handled.

 

Take care that the primary air intakes, located on the 

burner tube of this appliance are not obstructed, or that 

air flow is restricted by placing items or other appliances 

close to or adjacent to the inlets.

 Do not attempt to move or relocate the appliance when 

it is operating, extinguish the burner and allow to cool, 

disengage the gas cylinder then move the appliance.

 This appliance is to be stored in a dry and well-

ventilated location free from direct sunlight. Do not store 

when still connected to the cylinder. 

Make sure that the cylinder is disconnected and is stored 

in a well ventilated area, out of the reach of children, 

free from direct sunlight, heat and ignition sources. If 

being stored indoors, ensure that the location complies 

with the standard AS/NZS 1596.

 Never leave appliance unattended when operating. 

 

Do not use as a space heater.

Use as a lighting appliance only, is not to be used as 

heater or modify for any other reason.

After use, turn the gas cylinder valve off and wait for  

the flame to go out.

To check if gas remains in the cylinder, disconnect from 

the appliance and hold the cylinder in a vertical position 

then shake from side to side, if there is a sound or feel of 

liquid movement inside, the cylinder contains gas.

Summary of Contents for 2162-65













Reviews: