8
CONNECTION
Step 1.
Take the lantern connector and attach to the
gas inlet on the appliance, tighten up using a spanner.
Step 2.
Turn the cylinder gas valve on in an anti-
clockwise direction for one full turn and then check
the connections for leaks
NOTE:
If a leak is detected turn the cylinder gas valve
OFF and retighten all connections then retest.
LIGHTING LANTERN
(MANUAL AND PIEZO)
Step 1.
Turn the Gas Control Valve 1/4 of a turn.
Step 2.
2162-65:
Insert a long lit match into the base
of the lantern, making sure that it is positioned as
close to the mantel as possible.
Step 2.
2169-65:
Depress the Piezo Igniter two or
three times.
