6
COnneCtIOn
your stove is designed to connect directly to a gas cylinder with a 3/8”
gas valve using the specially designed lP Gas hose and in built regulator.
1.
Check that the cylinder gas control is in the “OFF” position
(turned fully clockwise)
2.
Check seals visually for wear before connecting before making connections
to appliance and cylinder
3.
Take the hose and attach to the gas inlet on the appliance and tighten
4.
Attach the other end of the hose to the gas cylinder, tightening using a spanner
5.
Check that both gas controls are in the “OFF” position, then turn the
cylinder gas valve on in an anti-clockwise direction for one full turn and
then check the connections for leaks with soapy water. If a leak is detected
turn the cylinder gas valve “OFF” and retighten all connections then retest
Summary of Contents for COMP2012
Page 1: ......
Page 4: ......
Page 12: ...Distributed by Companion Brands Bundoora Victoria 3083 www companionbrands com au...