OWNERS MANUAL
7
2. LIGHTING BURNER
Step 1.
Select the burner to be ignited and slowly turn the gas control in an
anti-clockwise direction approximately ¼ of a turn.
Step 2.
Depress the Piezo button firmly and look for a spark from the
electrode positioned above the burner.
Step 3.
If the burner does not ignite, turn the gas control in the clockwise
direction to the “Off” position and allow the residual gas to disperse
before attempting to reignite the burner.
3. ADJUSTING FLAME
Step 1.
Turn the gas control in an anti-clockwise direction to achieve a
higher flame and in the clockwise direction for a lower flame.
1
3
2
1
