Scan Modes
The scanner can be programmed to scan in di
ff
erent modes. To program the scanner for a new
mode, scan the ENTER SETUP barcode; next scan the desired mode’s barcode and then scan the
UPDATE barcode.
Alternate Mode (Always On)
—The scanner will start scanning once the trigger is depressed. The
scanner will continue scanning until the trigger is depressed again.
Trigger Mode
—The scanner will be scanning as long as the trigger is depressed.
Scan the ENTER SETUP barcode to begin programming.
ENTER SETUP
Select ONE of the Mode Settings by scanning the barcode.
To finish, scan the UPDATE barcode after you have selected a Scan Mode.
UPDATE
ALTERNATE MODE
(Always On)
TRIGGER MODE
(On with Trigger)
IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner
Page of
9
12
