4
C
OMPAQ
I
PAQ PCD-1
Side Features of Your Player
The left and right sides of your PCD-1 have several important features.
Note that the side features have icons associated with them to help identify their functions.
The Audio Out
1
and Power Supply
5
connections are covered by rubber plugs that must be pulled
back to make the connections.
1
Audio Out
- Allows you to plug your PCD-1 into your home stereo system (cable not
supplied).
2
Earphone Connection
- Plug in your headphones here to listen to CDs (headphones
supplied).
WARNING:
Permanent hearing loss may occur if headphones are used
at high volume.
3
Power button
- Press to turn the PCD-1 on. Hold for two seconds to turn the PCD-1 off.
4
Norm/Hold Switch
- The Norm/Hold switch should be in the Norm position for typical
usage.
When the switch is in the Hold position, the front panel buttons are disabled
.
In the Hold position, you can carry your PCD-1 in a pouch or purse and not worry about
accidentally pushing the buttons.
Tip:
You must set the
Norm/Hold
switch to the
Normal
position to turn on
the PCD-1. A
“Hold is on!”
message is displayed on the screen if the
switch is in the
Hold
position when you press the
Power
button. After
displaying the message, the PCD-1 shuts off.
5
Power Supply Connection
- Plug in your AC power adapter here to run the PCD-1 from a
standard electrical outlet.
Note:
Power off your PCD-1 before connecting it to AC power.
Left side
(facing front)
Right side
(facing front)
