Display assembly
NOTE:
Each display assembly spare part kit includes 1 webcam, 1 microphone, 2 speakers, and 2
WLAN antenna assemblies; 2 WWAN antenna assemblies on select models.
Description
Spare part number
Display, 25.7-cm (10.1-inch), WSVGA, AntiGlare for use with WWAN\
594806-001
Display, 25.7-cm (10.1-inch), WSVGA, AntiGlare
600125-001
Hinge covers
537617-001
Display bezel with logo for use with webcam and microphone
537644-001
Display hinge kit
Includes left and right display panel hinges
537658-001
Speaker assembly
Includes 2 speakers, cable, and housing
594811-001
Webcam module
537660-001
Display cable kit
Includes display/webcam cable and WLAN antennas
579571-001
Microphone assembly (44 dB, 4.9 × 2.2, omnidirectional)
581323-001
WWAN antenna assemblies
(Includes cables)
538022-001
Display back cover with logos
594808–001
Display screw kit (not illustrated)
538510-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 35
).
5.
If your computer has WWAN capability, remove the SIM (see
SIM on page 36
).
6.
Remove the following components:
a.
Keyboard (see
Keyboard on page 39
)
b.
Hard drive (see
Mass storage devices on page 43
)
c.
Top cover (see
Top cover on page 45
)
62 Chapter 4 Removal and replacement procedures
