Select
To do this
Processor C4 State
Enable/disable the processor C4 sleep state.
Boot Options
Set the following boot options:
●
f10
and
f12
Delay (sec.)
―
Set the delay for the
f10
and
f12
functions of the Setup Utility in intervals of 5 seconds each (0, 5,
10, 15, 20).
●
Internal Network Adapter boot
―
Enable/disable boot from Internal
Network Adapter.
●
Boot Order
―
Set the boot order for:
◦
Internal hard drive (select models only)
◦
USB Floppy
◦
USB CD/DVD ROM Drive
◦
USB flash drive
◦
USB Hard drive
◦
USB Card Reader
◦
Network adapter
NOTE:
Only the devices attached to the system will appear
in the boot order menu.
Diagnostics menu
Select
To do this
Hard Disk Self Test (select models only)
Run a comprehensive self-test on the hard drive.
Memory Test
Run a diagnostic test on the system memory.
72 Chapter 5 Setup Utility
