5–2
Maintenance and Service Guide
Setup Utility
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are
by keystroke.
■
To choose a menu or a menu item, use the arrow keys.
■
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or
f5
or
f6
.
■
To select an item, press
enter
.
■
To close a text box or return to the menu display, press
esc
.
■
To display additional navigation and selection information while the Setup Utility is open, press
f1
.
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not
open, begin at step 1. If the Setup Utility is open, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press
f10
.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press
esc
. When the Startup Menu is
displayed, press
f10
.
2. Select the
Main
menu. System information such as the system time and date, and identification information
about the computer is displayed.
3. To exit the Setup Utility without changing any settings, use the arrow keys to select
Exit > Exit Discarding
Changes
, and then press
enter
.
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already
running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press
f10
.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press
esc
. When the Startup Menu is
displayed, press
f10
.
2. Use the arrow keys to select
Exit > Load Setup Defaults
, and then press
enter
.
3. When the Setup Confirmation is displayed, press
enter
.
4. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and
then press
enter
.
The Setup Utility default settings go into effect when the computer restarts.
✎
Your password, security, and language settings are not changed when you restore the factory default settings.
