3
.
Lift the left side of the hard drive cover
(2)
, swing it to right, and remove the cover. The hard drive
cover is included in the Door/Cover Kit, spare part number 417074-001.
4
.
Remove the two black Phillips PM2.5×4.0 screws
(1)
that secure the hard drive to the computer.
5
.
Use the Mylar tab
(2)
to lift the hard drive
(3)
until it disconnects from the computer.
6
.
Remove the hard drive from the hard drive bay.
7
.
If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws
(1)
that secure the hard drive bracket to the hard drive.
Component replacement procedures 55
