60
2. Connect the USB cable to the USB port on the back of the
computer.
NOTE:
If you unplug the scanner’s power to turn it off, you must
also disconnect the USB cable from the computer. To resume use of
the scanner, reconnect the power cord, and then the USB cable.
Problem:
IRQ steering is disabled. For USB to function properly, IRQ
steering must be enabled.
Solution:
The
IRQ steering setting is located in the Device Manager. Follow
the steps below to find out if the IRQ steering is enabled:
1.
Click on the
My Computer
icon using the right mouse button.
A pop-up menu appears.
2.
Click on
Properties
command using the left mouse button.
This brings up the Device Manager.
3.
In the Device Manager click the + symbol beside the System
Devices item.
4.
Double-click the PCI Bus to display the PCI Bus Properties.
5.
Click on the tab labeled IRQ steering.
6.
The bottom half of this tab displays the IRQ Routing Status.
Look for the following items:
•
IRQ Routing enabled
•
IRQ read from (where it is read from)
•
IRQ Mini-port loaded successfully
•
IRQ Mini-port data processed successfully
If you see these items as listed above, IRQ steering is enabled. If
you do not see the information, contact your computer
manufacturer. USB will not function properly without IRQ steering.
Problem:
Summary of Contents for S4 100
Page 1: ...COMPAQ S4 100 Scanner OWNER S GUIDE P N 83100199 0000...
Page 16: ...12...
Page 54: ......
Page 60: ......
