PM1323
OPEN
CLOSE
OPEN VALVE AND VALVE CAP, TURN CCW
AND PULL
CLOSE VALVE AND VALVE CAP, PUSH AND TURN CW
PLACE THE OIL DRAIN HOSE AND VALVE INSIDE OF UNIT
6-3 AIR FILTER MAINTENANCE
-
Stop engine.
-
Do not work the engine without air
filter.
1. Foam Rubber element.
W ash the foam Rubber element with
water and soap. Dry completely with
air.
Impregnate the foam rubber element
with SAE 30 oil and wring the oil
ex cess.
2. Filter
Replace if filter is damage or dirty.
6-4 OIL CHANGE, OIL FILTER AND FUEL FILTER
- Stop engine.
1
Oil drane valve.
2
Hose 1/2" dia (not included).
3
Oil Filter, ride side (not shown).
4
oil dipstick.
Change oil filter according to maintenance
program close the drain valve before to add oil.
5
Fuel filter.
6
Fuel hose.
Replace the hose if is damage, install the new
filter start engine and verify fuel leakages.
TOOLS NEEDED
1
2
4
5
6
/
/
16
