e
3
item 04 127
Instructions for use:
ź
Start the engine and connect the plug to the
12V car cigarette lighter socket.
ź
Turn device on using ON/OFF button, set
desired temperature using + / - buttons, if
needed set timer that will shut unit off (1-12
hours) .
ź
The plug is equipped with a glass fuse, you
can replace it by unscrewing the front of the
connector.
ź
Replace the fuse only with a new one, with
the same parameters as the original one.
Maintenance:
This cover must not be washed or chemically
cleaned. Perform maintenance by wiping with a
damp cloth, or use non-aggressive foam fabric
cleaners.
The manufacturer accepts no liability for
accidents or damage resulting from non-
compliance with these instructions.
Text, design and technical specifications are
subject to change without notice and we reserve
the right to make changes.
Disposal and recycling
Do not dispose of power tools and devices in
the household waste!
According to the European Directive 2012/19 /
EC on Waste Electrical and Electronic
Equipment (WEEE) and in enforcement of
national law, used power tools must be collected
separately and transported to an appropriate
environmentally friendly recycling facility.
ź
Universal heated seat cover with pleasant to
touch material.
ź
Powered by 12V car socket.
ź
Built in thermostat.
ź
Control panel for temperature and timer
settings.
ź
Suitable for all types of seats.
ź
Even for seats with built-in airbag.
ź
Please read the enclosed instructions before
use.
Safety instructions
For the safety of the user, it is necessary to
carry out the installation in the correct way.
ź
No part of the seatcover may cover the
airbag outlet on the side of seat (see car
documentation).
ź
The cover must be placed on the seat so
that the seating part is placed on the seat
and a support part is on the support side.
ź
The metal hooks are designed to be
attached to the bottom of the seat and the
straps are designed for the backrest.
ź
The cover must be fitted directly on the
seat.
ź
There cannot be other objects placed under
the cover (eg. other covers, etc.).
ź
Never cover the heating cover with other
objects, such as pillows, other covers, etc.
ź
Do not fold or bend the cover to prevent
possible damage.
ź
The product is intended only for vehicles
with a 12V socket, it must not be used on
vehicles with 24V socket (not even in series
connection).
ź
The connection may only be made using the
supplied 12V plug.
ź
Always check the cleanliness of the 12V
lighter contacts and the cover plug before
use.
ź
The plug is equipped with a glass fuse.
ź
The fuse can only be replaced with a new
one with the same parameters.
ź
The seat cover must not be used in a
bended or folded state.
ź
Unplug before leaving the vehicle.
ź
Do not leave turned on cover in the car
unattended (battery discharge,
overheating).
ź
Do not pierce the cover with pointed
objects.
ź
Protect the cover from wetness and
moisture.
ź
The seat cover must not be used if the
cable insulation has been damaged, or if
you find other obvious damage.
ź
You cannot repair or open the heating cover
on your own.
ź
Do not, under no circumstances, wash in
the washing machine.
ź
Improper use and / or repairs will void the
manufacturer's warranty.
Technical data:
power supply:
12 V =
power:
1,5 - 3,3 A (18 - 40 W)
max. temperature:
60°C
thermofuse
yes
material
polyester
