34
Chapter 6 - Basic Configuration Guide
VPN Group Configuration: IPX Connection Tab
H. If you will be tunneling IPX traffic, click the IPX Connection
Tab.
•
Enter an IPX network number in the Start IPX Network
edit box. This IPX network number is the first IPX
address assigned to an incoming Client tunnel session.
The Start IPX Network also works with the Max Con-
nections value, which means you must have at least 30
consecutive unused IPX addresses available. The IPX net-
work number entered here must not be the same network
number as any other IPX network on your network and
you must choose a network number which will not overlap
as Client sessions are established. In this example, the first
client to connect will be assigned the IPX network
CAFEB00. The next client which connects concurrently
will be assigned the IPX network CAFEB01, and so on.
Leave all other parameters at their default settings for basic
configuration, or refer to the CompatiView Management Soft-
ware Reference Guide for more advanced configuration set-
tings.
I.
You may repeat Step 6 as needed to add all groups. When
you are finished adding groups, click OK.
