COMPCOOLER, PERSONAL THERMAL TECHNOLOGY
9
Clean and Maintenance
1.
Backpack:
User may use wet clothing to clean the backpack exterior dirty directly.
2.
Vest clean:
Prefer to clean by hand wash then hang dry.
Machine wash by Laundry bag: wash liquid heating and cooling vest using a front-loading
wash machine with cold water on a gentle/delicate cycle.
Note: DO NOT BLEACH, NO IRON, NO DRYER, TUMBLE DRY ON LOW
Components Renewal
1.
Battery: user may purchase an extra replacement battery or 7.4V 5A battery.
2.
Bladder: user may purchase more extra bladders to extend cooling time.
3.
Pump: user may purchase flow control pump unit to replace On/Off pump unit.
4.
Cooling vest: user may purchase cooling T-shirt or cooling garment to replace the
cooling vest, all Compcooler cooling garments are compatible with backpack circulation
unit.
Storage:
Unit Storage
Please empty the circulation water from circulation system and vest before storage.
1.
Bladder empty: disconnect the bladder from backpack, empty the liquid.
2.
Vest empty: connect the empty bladder with backpack, lean or upside down, press
On/Off to restart circulation, pump will push the water inside cooling channel return to
bladder,
Tips: make sure no water re-circulation from bladder to vest.
3.
Unit dry: please hang dry the bladder and unit more than 10 hours before storage.
4.
Restart system: after long term storage, please fill in clean water and run the unit more
than 10 minutes to reactive pump.
