COMPCOOLER, PERSONAL THERMAL TECHNOLOGY
9
Clean and Maintenance
1.
Waistpack:
User may use wet clothing to clean the waistpack exterior dirty directly.
2.
Vest clean:
Prefer to clean by hand wash then hang dry.
Machine wash by Laundry bag: wash liquid heating and cooling vest using a front-loading
wash machine with cold water on a gentle/delicate cycle.
Note: DO NOT BLEACH, NO IRON, NO DRYER, TUMBLE DRY ON LOW
Components Renewal
1.
Battery: user may purchase an extra replacement battery or 7.4V 5A battery.
2.
Bladder: user may purchase more extra bladders to extend cooling time.
3.
Pump: user may purchase flow control pump unit to replace On/Off pump unit.
4.
Cooling vest: user may purchase cooling T-shirt or cooling garment to replace the
cooling vest, all Compcooler cooling garments are compatible with waistpack
circulation unit.
Storage:
Unit Storage
Please empty the circulation water from circulation system and vest before storage.
1.
Bladder empty: disconnect the bladder from waistpack, empty the liquid.
2.
Vest empty: connect the empty bladder with waistpack, lean or upside down, press
On/Off to restart circulation, pump will push the water inside cooling channel return to
bladder,
Tips: make sure no water re-circulation from bladder to vest.
3.
Unit dry: please hang dry the bladder and unit more than 10 hours before storage.
4.
Restart system: after long term storage, please fill in clean water and run the unit more
than 10 minutes to reactive pump.
Battery Storage
1.
Shall be in the clean and dry ventilation room at temperature 0
℃
-35
℃
(32
℉
-95
℉
)
2.
Shall keep out of fire or heat and avoid touching corrosion elements
3.
Shall be charged every 6 months during storage
4.
Keep the battery out of children’s reach
Please STOP using the battery if any abnormal be found!
