Compcooler, keep your body cool and comfortable in harsh conditions.
10
Operation Processes
1.
Garment or Pad connection: Connect the extension tubing with liquid heating unit and liquid
cooling garment.
O
nce you hear a click, it’s in position.
2.
Power Connection: connect the chiller with vehicle power, light the controller.
The cooling unit will be in standby mode.
3.
Start cooling: user may press ON/OFF to start chiller, liquid temperature will go down to set
point in minutes.
pump is not working at this time.
4.
Temp setting: user may press up and down to set up the temp for circulation liquid as need.
5.
Start circulation:
User may press the pump to start or stop circulation. Please make sure the tubing is connected
(no kinks) before circulation.
Chiller Auto Control:
Chiller Stop: Liquid temperature 3
℃
(6
℉
) lower than setting
Chiller Restart: Liquid temperature 1
℃
(2
℉
) higher than setting
