Enter the setting mode.
Press the button
and
, the mode indicator will flash
yellow, follow the number (from 00 to 99), the mode indicator will
turn yellow in the mean time a long beep will be heard, it indicates
a success of delay time. 00-99 mean the delay time i.e. 05 means
the unlocking time is 5s delayed.
Press the button
twice to quit the setting mode.
Enter the setting mode.
1. Press the button
and
,(
follow the button
twice,(a continuously beep will be heard
and mode indicator will turn yellow),it indicates all user card and
code have been cleaned successfully.
2
mode indicator will flash yellow)
. Press the button
and
,(mode indicator will flash yellow)
follow the button
twice,(a long beep will be heard and mode
indicator will turn yellow),it indicates that the system has been
restored to factory default.
5
6
Press the button
twice to quit the setting mode.
9
G. Modify administrator code
Enter the setting mode
Press the button
and
,(mode indicator will flash yellow)
and input the
5-digital code XXXXX, and repeat it once again.
P
new
ress the button
twice to quit the setting mode.
Door indicator
The Relay 1 is activity ,door indicator will turn green
The Relay 2 is activity ,door indicator will turn red
Enter the setting mode:
.) Turn on the pickproof alarm:
ress the button
and
, (mode indicator will flash yellow)
follow the
and
.(a long beep will be heard whilst the mode
indicator will turn yellow ) pickproof alarm is turned on.
Press the button
to quit.
a.) Turn off the pickproof alarm:
Press the button
and
, (mode indicator will flash yellow)
follow the
and
.(a long beep will be heard whilst the mode
indicator will turn yellow ) pickproof alarm is turned off.
b
P
Enter the setting mode:
a.) Turn off the door Bell:
Press the button
and
, (mode indicator will flash yellow)
follow the
and
.(a long beep will be heard whilst the mode
indicator will turn yellow ) the function of door bell is turned off.
b.) Turn on the door Bell:
Press the button
and
, (mode indicator will flash yellow)
follow the
and
.(a long beep will be heard whilst the mode
indicator will turn yellow ) the function of door bell is turned off.
Press the button
to quit.
The relay in ZONE 2 for door bell is available if the function of
door bell is turned on but the function of door lock is not available.
Press the button
in stand by mode, the relay contacts one time ,
the door bell ringing is triggered.
Photoresistor
sensor
The built-in buzzer will sent a continuous
buzz if the photoresistor sensor is directly
exposed into the light. The Buzzer will turn
automatically in 60s, the light is no
longer detected or
off
enter the admin code.
I. Turn on/off the Door Bell (memory address 1BAB)
H. Turn on/off the pickproof alarm
E. Set the unlocked time for ZONE 2
F. Clean all user cards and codes
UnRegister
ed
