PRODUCT DESCRIPTION
The Compex® Fixx™ 2.0 massager helps warm up muscles before a workout, and relieve stiffness after a hard
session. Five, powerful intensity settings, paired with a high stall force, will give the intense pressure needed
to relieve the toughest spots safely and comfortably. Interchangeable tips (included) and a rotating head help
tailor your massage to the specific needs of different muscle groups. Removable and rechargeable batteries, a
compact design, and quiet motor help provide relief anywhere and everywhere.
INSTRUCTIONS
1. Before use, make sure Fixx™ 2.0 massager is off. Then, place the ball on to the metal shaft with slight
pressure until the shaft stops inside the ball. Turn clockwise until ball is secured in place. The ball must be
connected prior to operating the Fixx™ 2.0 massager.
2. Fixx™ 2.0 massager turns on when battery is inserted into massager. Making sure Fixx™ massager switch is
in the OFF position, slide battery into battery slot by pushing battery in until you hear the tabs on each side
click into place.
3. To turn on, slide the switch on the top handle forward.
4. To switch to the desirable massage speed level, rotate the speed dial knob clockwise to cycle from one level
to the next. The speed level indicator light will show the speed level you are on.
5. To rotate the arm, press the button on the circular housing. Arm can lock into 3 different positions
(0, 45, 90 degrees ).
6. To remove battery, push the release tab and then pull the battery from the massager.
7. To remove ball, turn Fixx™ 2.0 massager off and turn ball counterclockwise and pull ball away from the
shaft. Use antibacterial or alcohol wipes to clean ball between uses.
Battery level indicator (Figure 1.)
100%: Indicating lights in white.
75%: Indicating lights in grey
50%: Indicating lights in grey
25%: Indicating lights in red
2
