Assembling and standing the Swing Structure
3.a. Assemble the triple end to the top rail as shown below.
3.b. Assemble the legs into the triple end and top rail as shown below.
1.
Slide the end of the top rail into the triple end.
2.
Insert and tighten set screws into triple end socket with
allen wrench provided.
1.
Slide the end of the drilled legs into the triple end.
2.
Align the holes in the legs with the holes in the triple end and join
together using a 3/8” x 2 ¾” hex bolts and 3/8” nyloc nuts.
3.
Insert and tighten set screws into triple end with allen wrench provided.
3/8” x 2 ¾” Hex Bolt
with 3/8” Nyloc Nut
(1 each per leg)
3/8” x 3/8”
Set Screw
(1 each per leg)
Slide in leg, bolt in
place and secure
with set screw
Triple End
“A”
Frame
Leg
Summary of Contents for CH30-10
Page 27: ......
