Assembling Ladders and Attaching to deck support structure
4.a. Make a mark 108” up from the bottom of the ladder onto each ladder rail. Move the adjustable sleeves to
these marks and position them to receive the horizontal ladder by turning them to point at a 90 degree angle
(towards what will become the inside of the Horizontal ladder section of the structure.) Secure the set screws.
Notice Direction of the rungs on the ladders:
The Ladder without
the holes drilled
has the rungs
facing down.
The ladder with the
holes drilled has the
rungs facing up.
108
”
3.b. Assemble the legs into the triple end and top rail as shown below.
1.
Slide the end of the drilled legs into the triple
end.
2.
Align the holes in the legs with the holes in the
triple end and join together using 3/8” x 2 ¾”
hex bolts and 3/8” nyloc nuts.
3.
Insert and tighten set screws into triple end
with allen wrench provided.
Triple
End
A-Frame
Leg
Summary of Contents for CH45
Page 29: ......
