“A” Frame leg
holes are to be
dug at 18” in
diameter by 15”
deep.
Next have three adults stand on opposite ends and in the center to stand the structure
up into the place you want it to be installed.
Mark holes around a-frame leg, move set to the side of markings and dig holes.
Notice! Most of the “A” frame leg hole needs to be dug towards the inside of the “A” frame leg.
Place a level on the top rail and make the necessary adjustments to get set level.
#2
#1
“A” Frame leg
holes are to be
dug at 18” in
diameter by 12”
deep.
“A” Frame leg
holes are to be
dug at 18” in
diameter by 15”
deep.
#3
