RAVE/ROCKET SLIDE MOUNTING
INSTRUCTIONS
1. Attach the slide bracket to
the upright ladder by placing
the carriage bolt through the
ladder and through the holes
in the bracket. Then secure
with the flate washer, loc
washer, and hex nut.
AS
SHOWN ON RIGHT.
(It is
recommended that you level
both the ladder and the
bracket before you tighten
hex nut in place.)
2. Attach the slide to the bracket by
placing the slide in place on bracket.
Then drilling with a 3/8” drill bit
through the holes in the bracket into
the slide. (Holes in the bracket should
line up with mold for holes in the
slide.) Then insert the BHS bolt
through the slide holes and through
the holes in the bracket. Then secure
with the flat washer, loc washer, and
hex nut. AS SHOWN ON RIGHT.
3/8” x 3” Carriage
Bolt
Slide Bracket
3/8” Hex Nut
3/8” Loc Washer
3/8” Flat Washer
3/8” x 1 ¼” BHS Bolts
3/8” Flat Washer
3/8” Loc Washer
3/8” Hex Nut
