(a) Upright
Ladder
Model PH30-10 Continued
(b) A-frame
Legs
(c) PH Leg
24”
28”
20”
12”
18”
Slide Top Rail joint into place
about 1 inch inside the Ladder
Top Sleeve & secure with two
3/8” x 3/8” Set Screws
Upright
Ladder
Top Rail
#1 Hole Sizes for Cementing in the Set
#2 Ladder to Top Rail Assembly
#3 A-frame Leg Assembly
12”
Hole 28”x20”x24”
(approx. 6-7 80 lb. bags of
concrete mix per hole)
Holes 18” x 12” (approx.
1 ½” 80 lb. bags
concrete mix per hole)
Holes 18” x 12” (approx.
1 ½” 80 lb. bags
concrete mix per hole)
Triple
End
A-frame
Leg
3/8” x 2 ¾” Hex Bolt
with 3/8” Nyloc Nut
(1 per leg)
3/8” x 3/8” set screw
(1 each per leg)
Slide in leg, bolt in
place and secure
with set screw
(d) 3
rd
Leg
Hole 18” x 18”
(approx. two 80 lb.
bags of concrete mix)
Set screws
Set screws Set screw holes
Summary of Contents for PH30-10
Page 26: ......