3.a. Assemble the triple end to the top rail as shown below.
3.b. Assemble the legs into the triple end and top rail as shown below.
1.
Slide the end of the drilled top rail into the triple end.
2.
Align the hole in the top rail with the hole in the sleeve of
the triple end and join together using 3/8” x 3/8” set
screws.
1.
Slide the end of the drilled legs into the triple end.
2.
Align the holes in the legs with the holes in the triple end and join
together using a 3/8” x 2 ¾” hex bolts and 3/8” nyloc nuts.
3.
Insert and tighten set screws into triple end with allen wrench provided.
3/8” x 2 ¾” Hex Bolt
with 3/8” Nyloc Nut
(1 each per leg)
3/8” x 3/8”
Set Screw
(1 each per leg)
Slide in leg, bolt in
place and secure
with set screw
Triple End
“A”
Frame
Leg
Summary of Contents for PH30-10
Page 26: ......