•
The Compose Agfa PCI Interface Card is designed for Harlequin level 2 RIPs running
on the PC platform.This card allows a PC-PCI system to output data to all Agfa image-
setters. (There are 3 different versions of Agfa Interface Card. The AccuSet/ProSet
card can output to all Agfa imagesetters except the SelectSet and Avantra. The SelectSet
card can output to all Agfa imagesetters except the Avantra. The Avantra card can out-
put to all Agfa imagesetters.)
•
Interface cards can be daisy-chained via the optional Slave Buffer Boards to connect
multiple RIPs to an imagesetter.
•
For PCI PCs whose BIOS does not allow the user to specify which PCI slot uses which
interrupt level, an ISA paddle-card and cable is provided to allow the PCI card to
access interrupts using the ISA bus.
Warning:-
Please READ ALL of this Manual before proceeding with the following.
1. Install the Express Windows NT (Intel) RIP according to the RIP installation manual.
2. Before installing an interface card, check your machine’s warranty and follow any
instructions it contains to ensure that you do not invalidate it.
2. INSTALLATION PROCEDURES
1. FEATURES
Page 1
INSTALLATION INSTRUCTIONS
COMPOSE AGFA PCI I/F CARD
