Page 3
INSTALLATION INSTRUCTIONS
COMPOSE AGFA PCI I/F CARD
v.
If you want to configure the driver to set the PCI card setting, click the PCI Card
Driver Option button in the Install Agfa Driver menu.
vi.
Port Address
Set the correct Port Address. Make sure the Port Address is not conflicting with
other devices. All addresses from 0x200 to 0x 3F0 are validPort Aaddresses.
vii.
IRQ (Interrupt Request)
Using the Install Auto scan option will enable the installation software to find the
right Interrupt setting for the PCI Card. If auto scan is not successful, please read
item xvii- PCI Configuration for your PC, of this manual for details on how to set
the Interrupt manually.
If you have installed the PCI card on the PC before and you know that a particu-
lar IRQ setting will definitely work, then instead of doing an Auto Scan, you can
select that IRQ in the IRQ field directly.
If Auto Scan fails, you should try to use the ISA Paddle Card supplied with the
PCI Card to access Interrupts via the ISA Bus. If you are using the ISA Paddle
Card, make sure you check the Using ISA Cable option.
Valid Interrupts are 3, 5, 7, 9, 10, 11, 12, 15.
ix.
Click on OK to return to the Install Agfa Driver menu. You should now configure
the Agfa Output Options.
