5
5.1 Connecting the CVG-21RCA as a 2x1 Composite Video/Audio Switcher
To use your CVG-21RCA as a 2x1 composite video/audio switcher, connect
the CVG-21RCA as the example in Figure 2 illustrates:
1. Connect a composite source (for example, a VCR “Composite Source 1”)
to the three INPUT 1 channels, as follows:
•
Connect the composite video channel to RCA connector A
•
Connect the left stereo channel to RCA connector B
•
Connect the right stereo channel to RCA connector C
2. Connect a second composite source (for example, a VCR “Composite
Source 2”) to the three INPUT 2 channels, as follows:
•
Connect the composite video channel to RCA connector A
•
Connect the left stereo channel to RCA connector B
•
Connect the right stereo channel to RCA connector C
3. Connect the three OUTPUT channels to a composite acceptor (for
example, a monitor), as follows:
•
Connect the composite video channel to RCA connector A
•
Connect the left stereo channel to RCA connector B
•
Connect the right stereo channel to RCA connector C
4. Push in the front panel INPUT SELECTOR switch to route input 2, or
release it to route input 1.
Figure 2: Connecting the CVG-21RCA as a 2x1 Composite Video/Audio Switcher
