11
Each of these mode will have 2~4 tabs to
switch between different satellites (i.e.
under “4 ports DiSEqC1.2 switch” will have
Port S1, Port S2, Port S3, and Port S4 tab)
Note
Compro S350/S300 supports up to 4 ports
DiSEqC switch. Before using autoscan, you
may need to confirm the LNB connection
and settings are correctly setup. After
channel scanning, ComproDTV will receive
the correspondent channels of the satellite.
For information on above settings, please
refer to your satellite installer.
Pull-down list
Select all satellite TV channels or
specific satellite TV only
Free to Air
Only Free-to-Air channels
Radio
Only radio channels
Scrambled
Only scrambled channels
Note
After one of above selection made, only the selected list will be used by the
channel up/down buttons on the control panel.
Channel Naming
You can customize the channel names by double-click on the
Description
field
of the channel you wish to rename.
Please always press “Apply” before using
“Autoscan” and “DiSEqC motor control”.