background image

 

CCS70002

Micro Cross Cut Light Duty Shredder

Set-up Instructions:
Before using the machine for the first time, please read this operation manual 
and keep it for later use.

Tilt/Pull-out basket Models:  Connect the power cord to any standard 120 volt 
AC outlet. Push the green GoECO™ button to power ON the shredder. Insert 
paper to activate.
The power cord should be plugged directly into the outlet and not used in 
conjunction with a power extension cord. For pluggable equipment, the socket-
outlet shall be installed near the equipment and shall be easily accessible.

GoECO™ Power Saving Switch
Energy-Saving Technology prevents power drain (phantom load) when 
your shredder is not in use. Saves energy! Saves money!

Reverse/Off/Auto

Feed Opening/Throat

CAUTION: ALL SHREDDERS HAVE VERY SHARP, EXPOSED BLADES ON 
THE UNDERSIDE.

SPECIFICATIONS

Shred Capacity: 16 Sheets of 20 lb. (75 gsm) paper

Shred Type: Micro Cut

Shred Size: 0.16 in x 0.39 in (4 mm x 10 mm)

Throat Width: 8.86 in (225 mm)

TROUBLESHOOTING
1.  

Clearing a Jam  If paper is not inserted properly into the shredder, or if you exceed the sheet 
capacity a jam may result. Move the switch to the REVERSE (<<) position, and remove the excess 
paper from the top and pull it out. TO PREVENT ANY INJURIES, DO NOT PLACE YOUR HANDS 
NEAR THE FEED OPENING. Once the paper is cleared, normal shredding operation can resume. If 
the shredder jams while in reverse, press the switch to the AUTO position and let shredder run 
to dear the jammed paper. If jam does not clear, slide the switch back and forth between the REV 
and AUTO until the jam is cleared. If the jam cannot be cleared following this procedure, unplug 
the unit and carefully remove the jammed paper manually.

2.   Overheating    If your shredder overheats, the unit will automatically shut off and all functions 

will cease in order to protect the motor. Turn off and unplug the shredder from the outlet. Allow 
enough time for the motor to cool down. The shredder will not resume normal function until the 
motor cools down to a safe temperature. Once it is cooled down, plug the shredder back into the 
outlet and turn the unit back on. Resume normal operation. Make sure to empty wastebasket to 
avoid overloading the basket and damaging the cutting mechanism.

3.   Emptying Basket  AAlways tum the shredder off and unplug the power cord from the AC outlet 

before cleaning, moving, or emptying the wastebasket. Always keep wastebasket emptied so 
that the shredder’s output is not impeded. Never let the wastebasket get full. This will lead to 
shredded material being pulled back up into the shredder and cause jams.

4.   Bin Full Function  Some shredders are equipped with a mechanical or optical Bin Full sensor. 

When the basket becomes full, the shredder will cease operation. Empty basket and resume 
operation.

5.   Staples & Paper Clips  Our shredders are designed primarily to shred paper and single credit 

cards or CDs (as indicated). Although our shredders are safe to shred the occasional standard 
staples, staples should still remove whenever possible to prolong the life of the unit. Industrial or 
non-standard, large staples MUST be removed. DO NOT shred paper clips at any time as this will 
cause damage to the blades.

MAINTENANCE 
Use shredder lubricant regularly.
•  Only use lubricants specifically designed for your shredder, such as shredder lubricant or shredder 

lubricant sheets

• NEVER use spray lubricants
• Follow directions on the shredder lubricant sheets
• Do not touch the cutting surface

CAUTION 
•  Repairs must be made by a qualified technician. Do not attempt to repair the shredder yourself
• Do not alter the shredder or power cord in any way
• Do not operate the shredder if it or the power cord appears damaged in any way
• Always unplug the shredder when moving it or not using it for a long period of time
•  Do not shred envelopes, labels (or anything with glue or any sticky substance), wet paper, carbon 

paper, or vinyl or plastic bags. Shredding these items may reduce the shredder’s performance or 
cause jamming, shock or injury

• Empty the wastebasket regularly to ensure that the paper slot does not become blocked

Shredder is 
not intended 
for use by 
children

Do not insert 
fingers into 
the paper slot 
or the optical 
disc slot

Do not spray 
or keep 
any aerosol 
products in 
or around 
shredder

Avoid getting 
hair near the 
paper slot or 
the optical 
disc slot

Avoid getting 
loose clothing 
or jewelry near 
the paper slot 
or the optical 
disc slot

Do not put 
paper clips in 
the shredder

WARNING

1

2

Reviews: