Interfaces and Connectors
Revised May 2011
SB-A510 Rev 1.1
20
4.11
Power Output Terminals (P17, P19)
The SB-A510 is equipped with two power output terminals. The power output terminals (P17 & P19)
are provided for the S-ATA hard drive power supply.
Table 24 P17 connector pinout
Pin
Signal Name
1
VCC_12V
2
GND
Table 25 P19 connector pinout
Pin
Signal Name
1
VCC_5V
2
GND
4.12
S-ATA Connector (P18)
The SB-A510 is equipped with a standard S-ATA Connector (P18) that allows interfacing CM-A510
with standard and S-ATA disk drives.
Table 26 P18 connector pinout
Pin
Signal Name
1
GND
2
3
SATA_TX-
4
GND
5
SATA_RX-
6
7
GND
Table 27 P13 connector data
Manufacturer
Mfg. P/N
Mating connector
AMP
8505341-8
Standard S-ATA Cable.
All manuals and user guides at all-guides.com
