65
VECTOR
SELECTING AND CONTROLLING FIXTURES
3.
Press
ENTER
.
The pan and tilt values are set according to the values stored in the
library. The library icon is displayed in the pan and tilt cells.
4.
Press
COLOR
and enter 3 on the numeric keypad.
5.
Press
ENTER
.
The color values are set according to the values stored in the
library.The library icon is displayed in the relevant parameter cells.
Press IMAGE and enter 1 on the numeric keypad.
6.
Press
ENTER
The image values are set according to the values stored in the
library. The library icon is displayed in the relevant parameter cells.
7.
Store the cue
To apply multiple libraries simultaneously
Example:
Select position library 1, color library 3, and image library 5
and then apply them to the selected fixtures.
1.
Select fixtures.
2.
Press
POS
and
1
to select position library 1 (or use any other library
selection procedure).
3.
Press
COLOR
and
3
to select color library 3 (or use any other library
selection procedure).
4.
Press
IMAGE
and
5
to select image library 5 (or use any other library
selection procedure).
5.
Press
ENTER
.
All of the selected libraries are applied to the fixtures.
Summary of Contents for Vector Ultra Violet
