MENU - ALARM (continued)
TP4MD/CD / TP10MD/CD / TP16MD/CD
11
E
N
G
L
IS
H
DISPLAY
When the alarm is detected, the camera with the last
activated alarm can be switched into the full screen
mode or the alarm cameras on the main or spot chan-
nel can cycle according to the prepared period.
RELAY CONTACTS
Controlling an alarm output is displayed in the follow-
ing menu.
Normally open/closed
– this function defines the
situation of the relay without alarm.
Follow record
– if this function is selected, the relay
is active during the recording, functions below than
have no meaning.
No reaction to alarm
– no reaction to alarm inputs.
Follow input
– active during the alarm lasting on any
of the inputs.
Switch on XX seconds
– active for the time from 1 to
99 seconds since the last alarm activation.
No reaction to camera fail
– no reaction to the video
signal lost.
Switch on XX seconds
– active for the time from 1 to
99 seconds since the camera signal fails.
No reaction to activity detector
– activity detector
does not influence alarm output.
Switch on XX seconds
– active for the time from 1 to
99 seconds since the last activity detection.
SPEAKER
This menu controls the acoustic signalling of alarm.
Meaning of corresponding lines is the same as in
menu
Relay contacts
(see page 11).
Summary of Contents for TP10CD
Page 2: ......
