MENU – SYSTEM (continued)
16
TP4MD/CD / TP10MD/CD / TP16MD/CD
E
N
G
L
IS
H
START - UP
The device starts automatically recording after the
device is turned on, if the START RECORD line is
marked.
If the LOCK RECORD line is marked, the possibility of
switching recording off from the keyboard is blocked.
TELEMETRY
The telemetry receiver parameters of the multiplexer
can be set up in this menu.
Select protocol
– first line selects the communication
protocol.
Own address
– every device on the telemetry bus
must have its address, different from other connected
devices. The multiplexer address can be set up here.
Parameters
–setup parameters for selected protocol.
The following menus control the function of user out-
puts AUX1, AUX2 (see
Telemetry controlling
on
page 8)
Change output
– by pressing one of the buttons
AUX1/2 the state of user output will be changed.
Follow key
– The user output is switched on while
holding the button AUX.
ENABLE EXTERNAL KEYBOARD
– marking this
line you enable multiplexer to be controlled from ex-
ternal keyboard.
DOWNLOAD FIRMWARE
After choosing and confirming, the unit will be waiting
for firmware downloading from PC. On the PC the
downloading program must be started.
RELOAD FACTORY SETTING
If you press the button 1, all parameters will be
changed into the factory setting.
INFO
The system information of multiplexer is shown here.
Summary of Contents for TP10CD
Page 2: ......
