MBT-4000 Multi-Band Transceiver System
Revision 6
Remote Control
MN/MBT4000.IOM
Remote Control
A–9
MN/MBT4000.IOM
Parameter
Type
Command
(Instruction
Code and
qualifier)
Valid on
MBT,
BDC, or
BUC
Arguments
for Command
or Response
to Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
qualifier)
Response to
Query
(Target to
Controller)
Concise
Configuration
Status
N/A
All
48 bytes
(BDC)
41 bytes
(BUC)
32 bytes
(MBT)
alphanumeric
Query only.
Returns the summarized version of RCS.
Example for MBT-04000 base unit:
<0001/CCS?{cr}
>0001/CCS=aa,bb,cc,dd,e,ff,g,h{cr}{lf}
Where:
aa=Frequency band for Unit 1 BXC (‘C”, ‘X”, ‘Ka’, ‘Ku’, or ‘NA’)
bb=Frequency band for Unit 2 BXC (‘C’, ‘X’, ‘Ka’, ‘KU’, OR ‘NA’)
cc=Direction for Unit 1 BXC (‘DN’=BDC, ‘UP’=BUC, ‘NA’=None)
dd=Direction for Unit 2 BXC (‘DN’=BDC, ‘UP’=BUC, ‘NA’=None)
e = X (reserved for future use)
ff = X (reserved for future use)
g = X (reserved for future use)
h=External reference lock (1=locked, 0=Not locked)
Example BDC or BUC:
<0001A1/CCS?{cr}{lf}
>0001A1/CCS=aaaaa,bb.bb,c,d.d,e,ff,g,hhhh,i,j,{CR}{lf}
Where:
aaaaa=Frequency in MHz
bb.bb=Attenuation in dB
c=mute state, 0=unmated, 1=muted
d.d=slope adjust
e=LNA current source (BDC only, BUC=X)
ff=LNA current window (BDC only, BUC=XX)
g=LNA fault logic (BDC only, BUC=X)
hhhh=XXXX (reserved for future use)
i=X (reserved for future use)
j=Fault recovery, 0=Manual, 1=Auto
N/A
CCS?
CCS=x….x
(see description
for details of
arguments)
Circuit
Identification
CID=
All
24 bytes,
alphanumeric
Command or Query.
Used to identify or name the unit or station. First line is limited to
24 characters.
Example:
CID={cr}
-Earth Station 1--
---Converter #1---
CID=(message OK)
CID?(received OK,
but invalid arguments
found)
CID?
CID=x…x
(see description
for details of
arguments)
Summary of Contents for MBT-4000
