MNC-0500-038
20 of 28
Revision 2
Amplifier Communication and Protocol, XTRT, Touchscreen TWTA
Amplifier Commands
Table 7, List of Amplifier Commands
Command
Command byte
High Voltage Off
“A”
Fault Reset
“B”
Go to Power (dBW)
“D”
Go to Power (Watts)
“E”
High Voltage On
“@”
Constant Power (dBW)
“F”
Constant Power (Watts)
“G”
Terminate Constant Power
“H”
RF Inhibit
“I”
Clear RF Inhibit
“J”
Set Attenuator
“K”
Low RF Trip
“L”
High RF Trip
“M”
Reflected RF Trip
“O”
Miscellaneous Setup
“P”
Redundancy Control
“U”
Set Serial Configuration
“X”
Time and Date
“%”
Reset Processor
“
“
Heater Standby
“:”
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
