Operation
MNC-0400-071
Page 13 of 53
Revision 4
Figure 10 – Fault Mode
Fault Mode
Faults on Xicom XTRT series amplifiers can be separated in three separate categories’:
•
Power supply related faults
•
RF related faults
•
Interlock faults
•
Software selectable faults
Note:
For more information on individual Faults see following section
“Amplifier”.
Figure 11 – ONLINE Indication
ONLINE
When configured in system mode in which the amplifier can be switched into and out of
an RF path to the antenna, the amplifier will indicate it is routed in the RF path to the
antenna by this indicator.
Figure 12 – OFFLINE Indication
OFFLINE
When configured in system mode in which the amplifier can be switched into and out of
an RF path t a dummy load, the amplifier will indicate it is routed in the RF path to the
dummy load by this indicator.
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
