HE4000 Encoding System
Conditional Access
Delete an IRD from the Conditional Access List, if Required
8.
From the PGCAcfg menu, select DEL IRD. The IRD Delete menu displays.
9.
Use the Up and Down buttons to scroll through the list and select the required IRD.
10.
Press Enter. The LCD will display Delete <IRD name> Yes [No]
11.
Ensure that the correct IRD name is displayed and select Yes.
12.
Press Enter. When the information is processed, the system returns to the PGCA menu.
View the IRD Conditional Access List
13.
View the IRD conditional access list to ensure that all IRDs are listed and that all IRD
information was correctly entered.
14.
From the PGCAcfg menu, select LST IRD. The IRD List menu displays.
For each IRD, the following information is displayed: name of the IRD, it’s MAC address,
and if it is enabled (on) or disabled (off).
Enable and Disable Individual IRDs
15.
From the PGCAcfg menu, select LST IRD. The IRD List menu displays.
16.
Use the Up and Down buttons to scroll through the list and select the required IRD.
17.
Enable or disable the selected IRD. Use the minus sign (-) on the alpha-numeric keypad
to toggle between On and Off for the selected IRD.
18.
Continue selecting IRDs and enabling/disabling each as required.
19.
Press Enter. When the information is processed, the system returns to the PGCAcfg
menu.
B.9 Enable PGCA at the System Level
Enable PGCA
20.
From the main menu, select HE4000>CA>Enable.
Enter the Scramble Key
21.
Select PGCA KEY. Type in the key using the alpha-numeric keypad and press Enter.
HE4000 is Now Processing Data Using the Current PGCA Configuration
22.
PGCA is now enabled and will continue to use the current PGCA configuration until
PGCA is disabled or the PGCA configuration is changed.
To Disable PGCA at the System Level
To disable PGCA at the system level, select HE4000>CA>Enable Off.
01-0951-404 Rev B
B-
7
