Using the Front Panel
HE4000 Encoding System
3.12 Correcting Mistakes
3.12.1 Selecting Options
If an option is selected and the Enter button has not been pressed, use the Up or Down buttons
to scroll to the correct option.
3.12.2 Using the Keypad
If a value is entered via the keypad and the Enter button has not been pressed, the following may
be done:
•
Left button to delete the numbers and then enter the correct value.
•
Exit button which returns you to the previous menu level.
3.12.3 Leaving a Parameter
If the Enter button has not been pressed, a parameter can be left without modifying it by pressing
either the:
•
Exit button which returns you to the previous menu level
•
Left or Right buttons which take you to the next parameter
In either situation, the HE4000 will ignore any values entered and return the parameter to its
original setting.
3.12.4 After Pressing the Enter Button
If you accidentally issue an incorrect parameter value to the HE4000, you can correct the error
by:
1.
Selecting the correct option using the Up and Down buttons. The parameter will begin to
flash.
2.
Pressing the Enter button to set the correct option.
3-14
01-0951-404 Rev B
