HE4000 Encoding System
Using the Front Panel
3.16.2 Saving User Configuration and Renaming
To save a user define configuration and rename do the following:
1.
Select QuickSet from the main menu.
2.
Select QuickSet/Save and using up and down arrows select User1…User16.
3.
Select QuickSet/Rename and using up and down arrows select the saved user1…user16.
4.
Using the alphanumeric keypad, enter a name for the configuration set. The name can
be up to 15 characters in length. For alphanumeric characters, use numbers similar to a
standard phone keypad. For example, to enter a “B”, press the 2 button until a B is
displayed, then the right shift button.
5.
Press Enter. The new name is saved
3.16.3 Saving a User Configuration Under an Existing Label
To save a user-defined configuration set under an existing label:
1.
Select QuickSet from the main menu.
2.
Select QuickSet/Save and using up and down arrows select User1…User16.
3.
Press Enter.
The operating parameters in use at the time the restore process is
executed are overwritten and will be lost if not previously saved as a
configuration set.
3-36
01-0951-404 Rev B
