- 2 -
Congratulations!
You are now the proud owner of a Comtek 20 Meter Vertical Antenna. This
antenna may be built as a 20 meter, 17 meter, 15 meter, 12 meter or 10 meter monoband vertical
antenna.
Specifications:
•
Full band coverage on 20 or 17 or 15 or 12 or 10 meters with SWR under 1.5:1
•
No Tuner needed
•
Bandwidth: Over 750 kHz
•
Power Handling up to 5 kW
•
Weight: Approximately 8 pounds
•
Element Tubing: 3 element sections sized from 1" OD to .75" OD
•
Under 17 ft overall height
Parts List:
Description
QTY
Aluminum Mounting Plate, 7-1/2" x 5-17/32" x 1/4", Drilled
1
Element Insulator,
EXTREN
®
, 1.5" OD x 1" ID x 2" long, Split
2
Aluminum Cast Saddle 1.5", for Element Insulator
2
Stainless Steel U-Bolt 1.5", for Element Insulator
2
Hardware kit for U-Bolts (Nuts, Lock Washers, Flat Washers)
2
Studded Band Clamp, 1", with hardware (for Feedpoint Connection)
1
Element Clamp, Stainless Steel, for 1" antenna element
1
Element Clamp, Stainless Steel, for 7/8" antenna element
1
Stainless Steel Saddle for 2" V Bolts, for customer supplied mounting pipe
2
V-Bolt for 1 to 2" OD customer supplied mounting pipe
2
Hardware kit for V-Bolts (Nuts, Lock Washers, Flat Washers)
2
Black Vinyl Cap, for top of 3/4" OD antenna element
1
Aluminum Element - 1.000" OD x 72" x .058" Wall (split one end)
1
Aluminum Element - 0.875" OD x 72" x .058" Wall (split one end)
1
Aluminum Element - 0.750" OD x 72" x .058" Wall (split one end)
1
WARNING!
INSTALLATION OF ANY ANTENNA NEAR POWER LINES IS DANGEROUS
Warning
: Do not locate the antenna near overhead power lines or other electric light or power
circuits, or where it can come into contact with such circuits. When installing the antenna, take
extreme care not to come into contact with such circuits, because they may cause serious injury or
death.
