20
Step 4
Enter a parameter in each field. For fields that include the word,
TAB, e.g., Network Type (TAB), press the TAB key to select a
parameter from the pre-defined values. Then save the settings in
RAM by holding down the Ctrl-S keys.
Step 5
Return to the main menu and enter the
WRITE
menu to save the
configurations from RAM to flash memory. Refer to Section 11.2
for details.
Step 6
Reboot the system by entering the
REBOOT
menu from the main
menu. The system then powers on with the new parameters.
Refer to Section 11.3 for details.
Note: before you exit the Console/Telnet, be sure you have saved the changes to the
flash memory and reboot the device. If you do not, or you only write the changes
without rebooting the device, or even you reboot the system without writing the
parameters into the flash memory, the changes will be lost after you exit the
system.
